Top

microHAM microKeyer II
 
Share on Facebook Share on Twitter Share via E-Mail Share on Google Buzz Share on Digg

Previous
Next
Product 2 of 5

microHAM microKeyer II

Model cod 879
Manufacturer microHAM
Price:   2.832,00Lei
Reviews

Interfata USB ALL-IN-ONE MODE (CW, SSB, AM, FM si moduri digitale: RTTY, PSK-31, SSTV, APRS, Packet, Echo-link si altele)
USB: USB 2.0 Full speed , USB 1.1 compatible
Power consumption:
USB: up to 100mA
External: 400 mA (16 V max)
Radio Port: RXD, TXD, (RTS, CTS) max. 57600Bd
- levels: TTL, inverted TTL, open collector bus, RS232
Aux Port: TTL RxD, TxD - 9600 baud maximum
CI-V Port: open collector bus - 9600 baud
CW: open collector, max 30V/400mA
FSK: open collector, max 30V/400mA
- supported 5/6/7/8bit data length, 1/1.5/2 stop bit, up to 300 Bd
PTT1: open collector, max 30V/100mA
PTT2: open collector, max 30V/400mA
PA PTT: selectable by rear panel switch
- open collector, max. 48V/1.5A
- relay contact, max. 125VAC/2A 60VDC/2A
LNA PTT: selectable by rear panel switch
- open collector, max. 48V/1.5A
- relay contact, max. 125VAC/2A 60VDC/2A
Foot Switch: input, active when closed to ground, max. 5 mA
Audio Out:
- single channel (left)
- output impedance:600 Ohm
- output level: 4V p-p (max)
- AC coupled
- 3dB bandwidth: 0.2 - 6KHz typical
Audio In:
- dual channel (stereo)
- input impedance: 50k Ohm
- input level: 4V p-p (max)
- AC coupled
- 3dB bandwidth: 0.2 - 6KHz typical
Dimensions: W 232mm (9.125") x H 44mm (1.73") x D 105mm (4.125")
Weight: 1300g (1.875 lbs)
Requirements:
Minimum - 800 MHz IBM PC compatible computer with Windows 2000,
456 MB RAM, CD-ROM, USB1.1 port, Transceiver, logger or control software (any)
Recommended - 1.6 GHz PC with Windows XP or higher, 512 MB RAM,
CD-ROM, CD-ROM, USB2.0 port, Transceiver with computer port, CW paddle, PS/2 keypad, logger or control software (any)
Note: Windows 98 (all versions) is not supported.
Altele: Model cu Display si sound card
Acest echipament nu contine cablul de conectare la Transceiver
 Cablu se achizitioneaza separat .

La comanda acestuia trebuie specificat modelul Transceiverului.