BACK_TO_TOP

Hytera PD-365
 
Divide prin Facebook Divide Twitter Divide prin e-Mail Divide prin Buzz Divide prin Digg

produsul anterior
urmatorul produs
produsul 1 din 6

Hytera PD-365

MODEL cod 10101
MANUFACTURER Hytera
PRICE 1.740,00Lei
Comentarii

O statie compacta, ce permite utilizarea atat in mod analogic cat si digital TDMA-DMR.

In greutate de numai 160g si cu dimensiunea unui smartphone, aceasta statie poate fi purtata fara dificultati in orice circumstanta, acumulatorul de 2.000mAh oferind o autonomie crescuta in conditiile utilizarii puterii maxime de 3W (test la 5-5-90 duty cycle).

 

Hytera PD-365 corespunde in totalitate standardului ETSI referitor la DMR Tier II+III, fiind compatibila cu sistemele de repetor DMR.


Puterea de emisie poate fi selectata intre 1,5W (Low) si 3W (High) perm,itand astfel alegerea unui regim de utilizare adecvat diferitelor conditii de propagare radio.

Semnalizari analogice tip CTCSS si CDCSS.

Protectie la factorii de mediu:  IP54.
Rezistenta la socuri si vibratii: MIL-STD-810 C/D/E/F/G 
Permite transmiterea de SMS-DMR de pana la 64 caractere.

4 taste programabile.

Incarcare si progrmare via inerfata Micro-USB.

Functie de scanare a canalelor analogice si digitale.

Se livreaza cu acumulator Li-Ion 2Ah.

 

Datorita conditiilor impuse de furnizor, echipamentele de radiocomunicatie HYTERA se vand exclusiv radioamatorilor.

SPECS:

General data

Frequency range
UHF: 400 - 440 MHz, 430 - 470 MHz

Supported operation modes
DMR Tier II (DMR conventional)
Analog
DMR Tier II in reference to ETSI TS 102 361-1/2/3

Channel capacity 256

Zone capacity 16

Channel spacing
12.5/25 kHz (analog)
25 kHz (digital)

Operating voltage 3.7 V

Battery 2000 mAh (Lithium-Ionen-Akku)

Battery service life (5/5/90)
approx. 10 h (analog)
approx. 12 h (digital)

Frequency stability ±0.5 ppm

Antenna impedance 50 Ω

Dimensions (H×W×D)
(with standard battery, without antenna)
123 × 55 × 23 mm (PD355)
106 × 54 × 23 mm (PD365)

Weight approx. 160 g

Transmitter

Transmitting power UHF: 1.5 / 3 W

Modulation
11 K0F3E at 12.5 kHz
16 K0F3E at 25 kHz

4FSK digital modulation
12.5 kHz (data only): 7K60FXD
12.5 kHz (voice & data): 7K60FXW

Interfering signals and harmonics
-36 dBm < 1 GHz
-30 dBm > 1 GHz

Modulation limiting
±2.5 kHz at 12.5 kHz
±5.0 kHz at 25 kHz

Noise suppression
40 dB at 12.5 kHz
45 dB at 25 kHz

Adjacent channel selectivity
60 dB at 12.5 kHz
70 dB at 25 kHz

Audio sensitivity +1 dB to -3 dB

Nominal audio distortion ≤ 3%

Digital vocoder type AMBE+2TM

Receiver

Sensitivity (analogue)
0.22 μV (12 dB SINAD)
0.22 μV (typical) (12 dB SINAD)
0.4 μV (20 dB SINAD)

Sensitivity (digital)
0.22 μV / BER 5%

Adjacent channel selectivity
TIA-603 60 dB at 12.5 kHz / 70 dB at 25 kHz
ETSI 60 dB at 12.5 kHz / 70 dB at 25 kHz

Intermodulation
TIA-603 70 dB at 12.5/25 kHz
ETSI 70 dB at 12.5/25 kHz

Spurious response rejection
TIA-603 70 dB at 12,5/25 kHz
ETSI 70 dB at 12.5/25 kHz

Spurious response rejection
40 dB at 12.5 kHz
45 dB at 25 kHz

Nominal audio power output 0.4 W

Nominal audio distortion ≤ 5 %

Audio sensitivity +1 dB to -3 dB

Conducted spurious emission < -57 dBm

Ambient data

Operating temperature range -30 °C to +60 °C

Storage temperature range -40 °C to +85 °C

ESD
IEC 61000-4-2 (level 4)
±8 kV (contact discharge) ±15 kV (air discharge)

Protection against dust and moisture IP54

Shock and vibration resistance MIL-STD-810 C/D/E/F/G

Relative humidity MIL-STD-810 C/D/E/F/G